All apartments will have top quality finishes such as tiled and parquet floors, bathrooms with sanitary ware from Gala, Roca. The heating system will work through FEDA ECOTERM, and will be by means of underfloor heating. State-of-the-art video intercom installations in all flats, and fibre optic cabling. The kitchen will be by Santos, Leicht or similar. It will be equipped with ceramic hob, oven, microwave, dishwasher, fridge and extractor hood, all mid-range from Balay or similar.
DownloadThe sloping roof will be made of good quality Galician slate. Cutting irons will be placed, before placing them, they will be painted with a layer of mini and two of slate enamel. The base for the slate will be a 25 mm thick pine-type wooden scissor from the country, nailed to the roof slats with galvanized nails. There will also be a 0.8mm PVC fabric. Pre-lacquered sheet metal channels will be available for rainwater and snow collection. In the water sources of the roof, which are low points between two roofs, it will be made with self-protected fabric and will be traced back to find the tile.
The flat roofs, which will be on first-floor terraces and covered terraces, will be finished with 20 mm thick “all-mass” outdoor paving from the Alcalagres house or similar.
There will be enclosing walls of the work that will be made with ceramics of different thickness according to the needs.
The plasterboard walls will be made with 45mm guide and double 13mm plasterboard on each side, and on one side in the case of facade bends. In wetlands the normal plate will be replaced by a BA-13 plate. All the passage of installations and the points where it is necessary to reinforce the structure of the partition will be taken into account. The whole structure will be separated from the floor, ceiling and ceramic walls with neoprene gasket and between the mounts will be placed rock wool of medium density of 50mm.
The entire perimeter of the façade will be closed with a ceramic wall and a double-slab overhang on the inside.
The partitions between different floors and between the floor and the community space will be made with a ceramic central wall and with plasterboard folding with two finishing plates on each side.
All interior walls of the floors will be made of plasterboard walls with two plates on each side and when it is wet areas with marine plate.
All the technical requirements of the applicable regulations on energy efficiency will be taken into account to insulate the entire building. The thermal insulation will be with rigid panels of high density rock wool throughout the building envelope, taking special care to adjust the insulation plates as much as possible between them, adapting the panels to the shapes of the plant and structural elements, finishes of corners, corners, cuts, etc., to realize a completely watertight thermal envelope and without thermal bridges. The ground floor premises will be insulated from the roof of the garage with rock wool, which will then be covered with a false roof.
The waterproofing will be carried out with self-protected and unprotected asphalt emulsion, with elastomeric modified bitumen sheet, or with osmotic cement mortar, depending on the area to be waterproofed, paying special attention to the areas of overhangs, joints, corners, singular points, etc.
The exterior cladding of the façade will be ceramic materials, painted iron and synthetic materials imitation wood to choose from. Everything will go with ventilated facade system and the approximate facade volume is: 
In terms of materials and in the absence of validation, the following are for guidance only: 
NOTE: The finished image you are looking for is a bit like the façade of The Tower of Clot d'Emprivat.
Interior finishes will be divided into public areas and homes.
For public areas, all the vertical walls of the accesses and communal areas on the ground floor will be finished with noble materials such as ceramics, wood, etc ... and on the other floors with pine trees; the horizontal facings will be a false plasterboard ceiling, except for the entrance hall, which will be made of some type of metal or wooden slats.
Part of the parking lot will be painted vertical siding. All squares and storage rooms will be numbered with paint.
Inside the floors, the vertical cladding will be painted on all the walls except the bathroom and kitchen walls. The bathrooms will be made with tiles at full height and with the possibility of making a wall with a finish with Sikkens Magura type paint. The kitchen will return the workbench material (Neolith, dekton or similar) to the lower area of ??the high furniture.
The pavement of the common areas will be ceramic and on the outside it will also be ceramic but 20 mm thick and "todo massa" from the Alcalagres house or similar.
As for the pavement of the car park, it will be made of concrete with a rough finish and painted parking lines and the number of parking spaces.
Inside the floors, the horizontal cladding will be with flat ceilings and paint on the ceiling, and on the floor there will be a combination of tiles in the wet areas and imitation wood parquet in the rest of the floor. Synthetic parquet will be resistant to AC5 abrasion.
All exterior carpentry will be prepared for possible wind gusts and will meet the thermal needs of the building. The exterior carpentry will be made of aluminum, with a thermal break, just like the glass, which will be triple, with two air chambers, the set will meet the current thermal requirements. The balconies of the dining room will be at full height (2.55-2.60 m high) and will not have blinds and the balconies of the rooms will be made at a height of 2.20-2.25 m and if they will have electric blind of aluminum.
The access doors to the stairwells from the street will be made of aluminum to match the balconies and will have a double door, with a first gate and a back door with a lock and key.
The garage door will be sectional to the Hormann house or similar. Storage room doors will be metal and will include high and low ventilation at each door.
The door of each house will be armored with lacquered wood from the Carré house, with anti-lever hinges. The interior doors of the houses will be made of lacquered wood from the Carré house.
The electrical mechanisms will be from Bticino, Jung, Simon or similar.
In the kitchen area there will be LED strips on the bottom of the furniture.
All the toilets will be from Gala, Roca or similar from the mid-range.
In the showers there will be a ceiling sprinkler, a hand shower with support bar, and a built-in mixer on the wall, from Gala, Roca, Grohe or similar. The rest of the taps will be of the same brand.
The shower trays will be made of synthetic resins that can be adjusted to the geometry of the work.
Each shower tray will have a glass partition, fixed or mobile depending on the situation of each shower tray.
The bathroom furniture will be from the Gala or Roca house, with a throat handle and one or two drawers depending on each bathroom.
Each bathroom will include a mirror with integrated light.
The heating and DHW system will work through FEDA ECOTERM.
The heating system of the floors will be by means of radiant floor.
Each floor will include two thermostats, one for the day area and one for the night area. Both will be home automation and can be controlled from the mobile.
There will be state-of-the-art automatic video intercoms on all floors.
The installation of the television will be via satellite and terrestrial.
All floors will have fiber optics and basic telephone installation.
The cupboards will be from the Carré house, at full height from the room, 2.50 m high and will be finished in a furniture type, with the sides equal to the doors. Final finish will be lacquered equally on the doors of the rest of the floor.
The kitchen will be from the house Santos, Leicht or similar, with throat type handles, included with the same kitchen doors. Each kitchen will include part with hinged doors and drawers, as well as high furniture on the workbench and a column to integrate the oven and microwave. The part of the workbench and the lift up to the tall furniture will be with Neolith, Dekton or similar. The kitchen will be equipped with the following appliances: ceramic hob, oven, microwave, dishwasher, fridge and extractor hood, all of them mid-range from the Balay house or similar.
Each stairwell will be dressed with a foot mat and set of mailboxes according to the floor number of the Arregui house or similar.